U5119 NTK Ignition Coil 48347

Get U5119 NTK Ignition Coil 48347 in Kenya

The NTK Ignition Coil 48347 is a precision-engineered ignition component designed to ensure consistent and efficient ignition performance in modern internal combustion engines. Crafted with premium-grade materials and backed by advanced manufacturing standards, this ignition coil is a vital component in the ignition system, transforming the battery’s low voltage into the high-voltage energy needed to ignite the air-fuel mixture in the engine’s combustion chambers. Its robust design, optimized internal structure, and advanced insulation technology make it ideal for applications that demand reliability, longevity, and optimal engine performance.

1. Function and Purpose

At its core, the NTK Ignition Coil 48347 plays the pivotal role of voltage transformation. It takes the standard 12 volts from the vehicle’s battery and amplifies it to a much higher voltage—typically between 20,000 to 40,000 volts. This high voltage is then delivered to the spark plugs at precisely the right moment to initiate combustion in each cylinder. This process must be both rapid and accurately timed to support proper engine firing, power delivery, fuel efficiency, and reduced emissions.

The 48347 model is particularly engineered for engines that utilize a direct ignition system (DIS), where each cylinder has its dedicated coil mounted directly on top of the spark plug (commonly referred to as coil-on-plug systems). This layout eliminates the need for spark plug wires, reducing energy loss and enhancing overall ignition precision.

2. Construction and Design

The NTK Ignition Coil 48347 is built using top-tier construction techniques and materials to ensure reliability even under extreme operating conditions. Its key components include:

a) Primary and Secondary Windings

• Primary Coil: Constructed using copper wire of optimal gauge to provide minimal resistance and improved current flow.

• Secondary Coil: Contains thousands of windings tightly coiled to step up the voltage. The precision of these windings ensures minimal energy loss and consistent spark output.

b) Iron Core

The core is made of laminated silicon steel to reduce magnetic losses and optimize energy transfer. This core design maximizes magnetic field strength during the primary circuit charging phase, improving the coil’s output voltage.

c) Insulating Material

High-grade epoxy resin is used to encapsulate the windings. This prevents moisture ingress, protects against vibration damage, and enhances dielectric strength. The insulation allows the coil to operate reliably in a wide temperature range, from sub-zero cold starts to high-heat engine bay conditions.

d) Outer Housing

The casing is made from durable thermoplastic polymers or thermoset compounds, providing resistance to heat, oil, fuel, and other harsh environmental factors. This outer housing ensures the coil retains its shape, remains secure under engine vibrations, and resists cracking.

3. Performance Characteristics

The NTK 48347 Ignition Coil is built to deliver peak performance across all engine operating ranges. Its design ensures:

• Fast Voltage Build-Up: Essential for cold starts and quick engine cranking.

• Strong Spark Output: Consistent and powerful spark ensures complete fuel combustion, reducing misfires and enhancing engine responsiveness.

• Thermal Stability: Maintains efficiency and output even under high engine temperatures.

• EMI Suppression: Electromagnetic interference is minimized through built-in resistors or shielding, protecting sensitive electronic components nearby.

4. Installation and Compatibility

This coil is designed for plug-and-play installation with minimal need for modification. It fits snugly over the spark plug, locking securely into place with proper electrical connectors. The direct-fit design reduces installation time and ensures a firm electrical connection.

While specific vehicle applications are not referenced here, the coil is generally intended for engines that employ coil-on-plug configurations, often found in modern passenger vehicles and light commercial applications.

Key installation considerations include:

• Proper torque on mounting bolts

• Clean, corrosion-free connector terminals

• Use of dielectric grease to protect spark plug boot and ensure a tight seal

5. Durability and Lifespan

Engineered for longevity, the NTK Ignition Coil 48347 is subjected to a series of rigorous durability tests to validate its performance over time. These tests simulate real-world driving conditions, including exposure to:

• Thermal Cycling: Repeated heating and cooling cycles to ensure structural integrity.

• Vibration Testing: Simulating engine movement and road shocks.

• Moisture and Contaminant Exposure: Ensures resistance to water, oil, salt, and chemical contaminants.

The average service life of this ignition coil exceeds 100,000 kilometers under normal operating conditions, though it can vary based on driving habits, engine condition, and maintenance practices.

6. Diagnostic Indicators of Coil Failure

Although the NTK 48347 is built for endurance, ignition coils can eventually degrade. Typical signs that a coil may be failing include:

• Engine misfires or rough idling

• Check Engine Light (often related to cylinder misfire codes)

• Poor acceleration or reduced fuel efficiency

• Hard starting or stalling

• Backfiring or exhaust popping sounds

In such cases, timely replacement of the ignition coil is essential to prevent further damage to the catalytic converter or other engine components.

7. Maintenance and Care Tips

To extend the lifespan of the NTK 48347 Ignition Coil, it’s important to:

• Replace spark plugs at recommended intervals to prevent coil overloading.

• Ensure moisture does not collect around the ignition coil boots.

• Keep the engine bay clean to reduce dirt buildup and heat accumulation.

• Avoid washing the engine with high-pressure water near ignition components.

Routine inspection of ignition system components during service intervals can help catch issues early and maintain consistent engine performance.

8. Advantages of Using NTK 48347 Ignition Coil

• High Voltage Output: Ensures strong, consistent sparks under all operating conditions.

• Precision Manufacturing: Tight tolerances reduce the risk of internal shorting or performance degradation.

• OEM-Level Fit and Finish: Designed to meet or exceed original performance standards.

• Enhanced Fuel Efficiency: By ensuring optimal combustion, the coil helps maximize mileage.

• Lower Emissions: Proper ignition timing and spark strength reduce unburned hydrocarbons in the exhaust.

9. Quality Control and Testing

Each NTK Ignition Coil 48347 undergoes extensive quality control processes including:

• Inductance, resistance, and capacitance testing

• High-voltage leakage tests

• Thermal and humidity chamber exposure

• Electrical load cycling

These ensure every unit meets defined performance metrics before reaching the market.

Follow us on Facebook for more parts.