Motul 8100 Eco-Clean C5/C6 SAE 0W-20 5Ltrs

Get Motul 8100 Eco-Clean C5/C6 SAE 0W-20 5Ltrs  in Kenya

Motul 8100 Eco-Clean C5/C6 SAE 0W-20 is a premium-grade, fully synthetic engine oil designed to meet the demands of modern, high-efficiency engines operating under tight environmental and performance standards. Developed using Motul’s advanced synthetic base stocks and formulated to meet the latest ACEA and API specifications, this engine oil delivers exceptional protection, cleanliness, and fuel economy across a wide range of driving conditions.

This 5-litre pack of Motul 8100 Eco-Clean 0W-20 is ideal for drivers and technicians who value uncompromising performance, advanced lubrication technology, and extended oil change intervals—all while reducing the vehicle’s environmental footprint.

1. Advanced Lubrication for Modern Engines

Motul 8100 Eco-Clean 0W-20 is engineered to meet the stringent demands of modern internal combustion engines that are:

• Turbocharged or naturally aspirated

• Direct- or indirect-injection

• Gasoline or diesel-powered

• Fitted with emission control technologies such as diesel particulate filters (DPF), gasoline particulate filters (GPF), EGR systems, and catalytic converters

The formulation provides precise lubrication and superior film strength, even under extreme heat or load. This translates to smoother engine performance, reduced friction, and minimal wear across components like piston rings, timing chains, and camshafts.

2. Compliance with C5 and C6 Standards

Motul 8100 Eco-Clean C5/C6 is compliant with the latest ACEA C5 and ACEA C6 standards—European classifications designed to guarantee:

• Low High Temperature High Shear (HTHS) viscosity for fuel economy

• Compatibility with after-treatment systems

• Longer oil change intervals

• Strict control of piston cleanliness and sludge formation

The ACEA C6 specification, in particular, focuses on engines built with the latest low-viscosity oil technologies, ensuring that the oil contributes to reduced CO₂ emissions and improved cold-start flow.

3. API SP and ILSAC GF-6A Approved

This oil carries the latest API SP and ILSAC GF-6A approvals, meeting strict industry requirements for:

• Improved oxidation stability

• Low-speed pre-ignition (LSPI) resistance

• Chain wear protection

• Enhanced fuel economy

• Deposit control

These standards make the oil an ideal choice for engines equipped with turbochargers, start-stop systems, and direct injection—systems that place increased thermal and mechanical stress on lubricants.

4. Ultra-Low Viscosity: 0W-20

The SAE 0W-20 viscosity grade reflects its ability to flow effortlessly even in cold temperatures while maintaining protective viscosity at operating temperatures. This offers multiple benefits:

• Faster engine starts in cold weather

• Rapid oil pressure buildup to reduce start-up wear

• Reduced internal drag for better efficiency

• Optimized fuel consumption and reduced emissions

By reducing friction and improving internal lubrication under various RPMs and load conditions, this oil enhances drivability and supports improved engine responsiveness.

5. Cleaner Engine Operation

“Eco-Clean” isn’t just a name—it reflects the oil’s ability to maintain a cleaner, more efficient engine throughout its service life. Key benefits include:

• Outstanding sludge and deposit control even in extended drain intervals

• Superior piston cleanliness due to enhanced detergent/dispersant additives

• Minimized oil thickening and oxidation over time

• Protection for turbochargers and timing chains, which are especially vulnerable to varnish buildup

This results in longer-lasting engine components, reduced maintenance costs, and extended peak engine performance.

6. Protection for Emission Control Systems

Modern engines rely on complex emission systems to reduce NOx, carbon monoxide, and particulate matter. Motul 8100 Eco-Clean 0W-20 is formulated with low SAPS (Sulfated Ash, Phosphorus, Sulfur) content to ensure compatibility with:

• Diesel Particulate Filters (DPF)

• Gasoline Particulate Filters (GPF)

• Selective Catalytic Reduction (SCR) systems

• Three-Way Catalytic Converters (TWC)

By minimizing ash content and chemical contamination, this oil helps prevent clogging and deterioration of sensitive exhaust after-treatment devices—ensuring compliance with strict emission regulations.

7. Fuel Economy Benefits

Motul 8100 Eco-Clean C5/C6 SAE 0W-20 plays a vital role in helping engines achieve optimal fuel economy. Its low viscosity reduces parasitic drag on moving components, while friction modifiers allow smoother interaction between metal surfaces. This leads to:

• Lower fuel consumption per kilometer

• Reduced greenhouse gas emissions

• Improved engine thermal management

• Savings over the oil’s lifespan

Especially when paired with eco-driving habits, the oil helps extend the efficiency curve of both gasoline and diesel engines.

8. Oxidation and Thermal Stability

Motul’s proprietary synthetic base oils offer outstanding oxidation resistance, making the oil highly stable under high-temperature conditions. Whether operating in stop-and-go traffic, long-distance highway cruising, or in high-load environments, this oil resists:

• Breakdown at high engine temperatures

• Thickening or sludge formation

• Foaming or aeration issues

This ensures a consistent oil film across all engine surfaces, maintaining stable performance until the end of the oil change interval.

9. Extended Drain Intervals

Thanks to its high-performance synthetic formulation, this engine oil can often support extended oil change intervals as recommended by vehicle manufacturers. Factors contributing to this extended lifespan include:

• Stable viscosity retention

• Long-lasting additive package

• Exceptional shear stability

• Contaminant dispersion and neutralization

This helps reduce workshop visits and long-term ownership costs, particularly beneficial for fleet operators or high-mileage drivers.

10. Environmental Considerations

Motul 8100 Eco-Clean 0W-20 aligns with eco-conscious values:

• Reduced carbon footprint through improved fuel efficiency

• Longer service life, reducing oil waste generation

• Low emissions due to cleaner burn and minimized ash

Its formulation is compliant with modern regulatory standards aimed at reducing environmental impact—without compromising on engine performance.

11. Packaging & Storage

This engine oil is packaged in a robust and ergonomic 5-litre container, designed for:

• Ease of handling and pouring

• Resealable cap for partial use or topping off

• Clearly marked volume indicators

• Tight sealing to prevent contamination

It should be stored upright in a cool, dry, and clean environment, away from direct sunlight or temperature extremes, to maintain product integrity.

Follow us on Facebook for more parts.