Amaron N70 Battery

Get Amaron N70 Battery in Kenya

The Amaron N70 Battery is a high-performance, heavy-duty lead-acid battery engineered for reliability, long service life, and consistent power delivery in a wide range of vehicles and demanding environments. Known for its superior build quality and advanced technology, the Amaron N70 is built to deliver strong cold cranking performance, exceptional reserve capacity, and minimal maintenance requirements—making it a preferred choice for both private and commercial applications.

Constructed using high-grade materials and designed with advanced calcium technology, the N70 battery provides dependable ignition power, durability under extreme temperatures, and corrosion resistance for extended battery life. It is ideally suited for high-power-demand vehicles and environments where resilience and performance are non-negotiable.

Design and Construction

The Amaron N70 Battery is a 12-volt, lead-acid flooded type battery that incorporates several design features to improve performance, enhance reliability, and minimize maintenance.

Key Components:

1. Plates and Grids

   • Made with a calcium-silver alloy for increased corrosion resistance and lower water loss.

   • Thicker plates provide higher charge capacity and durability during deep cycles.

2. Separators

   • Use advanced polyethylene envelope separators that enhance acid circulation, minimize internal short circuits, and promote efficient ion exchange.

3. Electrolyte

   • A controlled mixture of sulfuric acid and water optimized for temperature performance and charge acceptance.

4. Polypropylene Container

   • The high-strength, heat-sealed casing resists impact, vibration, and deformation, ensuring structural integrity even in rugged operating conditions.

5. Vent Caps with Flame Arrestors

   • Allow gases to escape safely while preventing external ignition sources from entering the battery.

6. Integrated Handles

   • Molded side handles support easy and safe battery handling during transport and installation.

7. State-of-Charge Indicator (on select models)

   • A built-in eye that displays battery health for quick diagnostics.

The result is a robust, reliable energy source capable of handling the demands of frequent starts, high accessory loads, and long idle periods without significant degradation.

Technical Specifications

• Battery Type: Lead-Acid, Flooded

• Nominal Voltage: 12V

• Capacity: Approximately 70Ah at C20 rate

• Cold Cranking Amps (CCA): ~600–720 CCA (varies slightly by model variant)

• Reserve Capacity (RC): Around 120–150 minutes

• Terminal Type: Standard top-post (DIN/SAE type)

• Polarity Configuration: Left or right positive (varies by variant)

• Dimensions (approx.):

  • Length: ~306 mm

  • Width: ~173 mm

  • Height: ~225 mm (including terminals)

• Weight: ~20–22 kg

• Maintenance: Low-maintenance; periodic electrolyte checks may be required

• Technology: Calcium-calcium alloy, zero-maintenance technology

These specifications may vary slightly depending on the exact variant of the N70 battery, such as N70Z, N70ZZ, or N70MF.

Performance and Benefits

The Amaron N70 is engineered to offer superior electrical performance, low maintenance, and long service life, even in harsh operating conditions.

1. Longer Life

• Designed for deep discharge cycles and high heat resistance.

• Special alloy reduces grid corrosion and water loss, extending overall battery lifespan.

2. High Cold Cranking Power

• Delivers strong starting power in low temperatures, ideal for vehicles operating in cooler climates or needing reliable morning ignition.

3. Fast Recharge Capability

• High charge acceptance rate allows the battery to recharge more quickly than standard batteries, especially during short trips or heavy usage.

4. Vibration Resistance

• Built to withstand shocks and vibrations common in off-road and rough-terrain driving.

5. Spill-Proof and Leak-Resistant Design

• Prevents acid leakage under normal usage, enhancing safety and environmental compliance.

6. Reduced Maintenance

• Low self-discharge and minimal electrolyte evaporation mean fewer top-ups and longer service intervals.

7. Reliable Power Supply

• Provides consistent voltage output for reliable operation of lights, ignition systems, sensors, and in-vehicle electronics.

Applications

The Amaron N70 Battery is a multi-purpose, heavy-duty battery ideal for a range of applications, including:

• Passenger vehicles with large engines

• Commercial vehicles and light trucks

• Pick-ups and 4x4s

• Agricultural machinery

• Construction equipment

• Backup and auxiliary power setups

• Off-road utility vehicles

• Vehicles equipped with audio systems, winches, or additional electronic accessories

Its robust design and deep-cycle resilience make it particularly suitable for high-demand electrical systems and extended operating durations.

Maintenance and Care

Though designed for minimal maintenance, a few simple practices can ensure optimal battery performance and longer life:

• Visual Inspection: Check periodically for signs of swelling, corrosion on terminals, or electrolyte loss.

• Terminal Cleaning: Keep terminals clean, tight, and corrosion-free. Use terminal grease if necessary.

• Electrolyte Check: On non-sealed versions, ensure electrolyte levels are within the marked range.

• Charge Regularly: Avoid full discharges. Keep the battery charged, especially during long storage periods.

• Proper Mounting: Secure the battery in place to prevent movement and vibration.

• Avoid Overcharging: Use a regulated charger when charging outside the vehicle.

• Temperature Awareness: Store and use the battery within recommended temperature limits to avoid premature aging.

Following these guidelines ensures safe operation and optimal performance from the battery over its intended lifespan.

Environmental and Safety Considerations

Amaron adheres to stringent manufacturing and environmental standards. The N70 battery is built using eco-friendly processes, and its components—lead, acid, and plastic—are recyclable.

Safety Tips:

• Always wear gloves and safety goggles when handling lead-acid batteries.

• Avoid contact with battery acid. In case of a spill, neutralize with baking soda and clean immediately.

• Dispose of old batteries responsibly by returning them to an authorized recycling center or battery dealer.

Follow us on Facebook for more parts.